Rotatry Geared Limit Switch grls

GRLS/48/2SH

Introduction

Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving loads reach the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations & movements are transmitted to switches by adjustable cams.

 

Application

A Rotary Geared Limit Switch are suitable for use on reversing drives such as Hoists, Winches, Rolling Mills & various other mechanisms used in steel plants such as Coke Oven, Feeding Oven Machinery etc.

 

Technical Data

Body Material Aluminum Die cast
Protection Degree IP-55 Confirming to(IS/IEC : 60529(2001)
Gear Ratio 48:1
Drive Worm Drive
Cable Entries 2X3/4* Conduit
Contact Material Silver Cadmium
Rated Voltage Insulation 500 VAC
Thermal Test Current 40 Amps
No. Of Contacts 2NC OR 2NO
Cam Setting Adjustable

GRLS/60/2SH

Introduction

Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving loads reach the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations & movements are transmitted to switches by adjustable cams.

 

Application

A Rotary Geared Limit Switch are suitable for use on reversing drives such as Hoists, Winches, Rolling Mills & various other mechanisms used in steel plants such as Coke Oven, Feeding Oven Machinery etc.

 

Technical Data

Body Material Aluminum Die cast
Protection Degree IP-55 Confirming to(IS/IEC : 60529(2001)
Gear Ratio 60:1
Drive Worm Drive
Cable Entries 2X3/4* Conduit
Contact Material Silver Cadmium
Rated Voltage Insulation 500 VAC
Thermal Test Current 40 Amps
No. Of Contacts 2NC OR 2NO
Cam Setting Adjustable

GRLS/96/2SH

Introduction

Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving loads reach the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations & movements are transmitted to switches by adjustable cams.

 

Application

A Rotary Geared Limit Switch are suitable for use on reversing drives such as Hoists, Winches, Rolling Mills & various other mechanisms used in steel plants such as Coke Oven, Feeding Oven Machinery etc.

 

Technical Data

Body Material Aluminum Die cast
Protection Degree IP-55 Confirming to(IS/IEC : 60529(2001)
Gear Ratio 96:1
Drive Worm Drive
Cable Entries 2X3/4* Conduit
Contact Material Silver Cadmium
Rated Voltage Insulation 500 VAC
Thermal Test Current 40 Amps
No. Of Contacts 2NC OR 2NO
Cam Setting Adjustable

GRLS/48/4SH

Introduction

Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving loads reach the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations & movements are transmitted to switches by adjustable cams.

 

Application

A Rotary Geared Limit Switch are suitable for use on reversing drives such as Hoists, Winches, Rolling Mills & various other mechanisms used in steel plants such as Coke Oven, Feeding Oven Machinery etc.

 

Technical Data

Body Material Aluminum Die cast
Protection Degree IP-55 Confirming to(IS/IEC : 60529(2001)
Gear Ratio 48:1
Drive Worm Drive
Cable Entries 2X3/4* Conduit
Contact Material Silver Cadmium
Rated Voltage Insulation 500 VAC
Thermal Test Current 40 Amps
No. Of Contacts 2NC OR 2NO
Cam Setting Adjustable

GRLS/60/4SH

Introduction

Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving loads reach the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations & movements are transmitted to switches by adjustable cams.

 

Application

A Rotary Geared Limit Switch are suitable for use on reversing drives such as Hoists, Winches, Rolling Mills & various other mechanisms used in steel plants such as Coke Oven, Feeding Oven Machinery etc.

 

Technical Data

Body Material Aluminum Die cast
Protection Degree IP-55 Confirming to(IS/IEC : 60529(2001)
Gear Ratio 60:1
Drive Worm Drive
Cable Entries 2X3/4* Conduit
Contact Material Silver Cadmium
Rated Voltage Insulation 500 VAC
Thermal Test Current 40 Amps
No. Of Contacts 2NC OR 2NO
Cam Setting Adjustable

GRLS/96/4SH

Introduction

Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving loads reach the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations & movements are transmitted to switches by adjustable cams.

 

Application

A Rotary Geared Limit Switch are suitable for use on reversing drives such as Hoists, Winches, Rolling Mills & various other mechanisms used in steel plants such as Coke Oven, Feeding Oven Machinery etc.

 

Technical Data

Body Material Aluminum Die cast
Protection Degree IP-55 Confirming to(IS/IEC : 60529(2001)
Gear Ratio 96:1
Drive Worm Drive
Cable Entries 2X3/4* Conduit
Contact Material Silver Cadmium
Rated Voltage Insulation 500 VAC
Thermal Test Current 40 Amps
No. Of Contacts 2NC OR 2NO
Cam Setting Adjustable

Address

Kaveri Estate, G.I.D.C, Phase IV, Vatva, Ahmedabad-38244
Phone No: +91-9920784377
E-mail: mail@safepowerengineering.in
Website: www.safepowerengineering.in